DFRduino Pro Mini V1.3(16M5V328)

The 5V DFduino Pro Mini V1.3(Arduino Pro Mini Compatible) is a microcontroller board based on the ATmega328.
SKU: DFR0159

Availability: 4 In Stock


Free Shipping on orders over $50
(USA Only)

Economy shipping for $5.99 (USA Only)
Or choose UPS or USPS Priority Mail.

International Shipping also available.

US Schools/School Districts can order by Purchase Order



It is a 5V DFduino running the 16MHz bootloader (select 'Arduino Duemilanove w/ 328' within the Arduino software).

It is an advanced version of official Arduino Pro Mini. The DFRduino Pro mini has 8 analog inputs compared with official's 6. The rest bits are exactly the same.

It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 8 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers. A six pin header can be connected to an FTDI cable or DFRobot breakout board to provide USB power and communication to the board.

The DFRduino Pro Mini is intended for semi-permanent installation in objects or exhibitions. The board comes without pre-mounted headers, allowing the use of various types of connectors or direct soldering of wires. The pin layout is compatible with the Arduino Mini.

We recommend that you choose one of following items to program and supply power for your Mini pro board.

1. FTDI Basic Breakout 3.3/5V (Arduino Compatible).
2. USB Serial Light Adapter (Arduino Compatible).

Note: Compared with DFduino Pro Mini V1.2, this V1.3 reverses the pins of the programming interface.


DFRduino Pro Mini V1.3(1 unit).


Schematic, LDO regulator datasheet, Getting Started Tutorial .

Additional Info

Additional Info


DC input: 5V up to 8V(power supply from RAW pin).
DC input: 5v(from VCC pin).
Bootloader: Arduino Pro/Pro Mini (5V, 16Mhz) w/ Atmega328.
5V regulator.
Max 150mA output.
ATmega328 running at 16MHz with external resonator (0.5% tolerance).
Low-voltage board needs no interfacing circuitry for popular 3.3V devices and modules (GPS, accelerometers, sensors, etc).
USB connection off board.
Supports auto-reset.
Over-current protected.
Reverse-polarity protected.
On board Power and Status LEDs
Size: 0.7x1.3" (18x33mm).

Data Sheets
Minimum Age No
Other SKUs N/A