The 2-Wire Motor 393 is the primary actuator used in the VEX Robotics Design System. Build rotational mechanisms, drive bases, rotational joints, conveyor belts - anything that spins can be built using the 2-wire Motor 393.
Strong, steel internal gears.
Can be configured into a "high speed" version.
The 2-Wire Motor 393 does not have an internal motor controller.
The motor connects directly to 2-Wire Motor Ports (Ports 1 & 10 on the Cortex Microcontroller). For 3-Wire Motor Ports (Ports 2-9 on the Cortex), a Motor Controller 29 must be used in between the Microcontroller and the motor.
(1) VEX 2-Wire Motor 393 Module.
(2)6-32 x 1/4" Screws.
(2)6-32 x 1/2" Screws.
(1)Change Gears Set.
Compatibility : All VEX Square Shafts 0.125" (3.2mm), 2-Wire Motor Ports, 3-Wire Motor Ports (with a Motor Controller 29).
Free Speed: 100 rpm (As Shipped)/160 rpm (High Speed Option).
Stall Torque: 1.67 N-m (14.76 in-lbs) (As Shipped)/1.04 N-m (9.2 in-lbs) (High Speed Option).
Stall Current: 4.8A.
Free Current: 0.37A.
All motor specifications are at 7.2 volts.
Motor: 0.192 lbs (87.1 grams).
6-32x1/4" Screw: 0.0014 lbs (0.617 grams).
6-32x1/2" Screw: 0.00209 lbs (0.948 grams).
Motor Coupler: 0.004 lbs (1.814 grams).
Motor Post: 0.002 lbs (0.907 grams).
Actual weight of one item (no packaging).
Notes: Motor Case screws are M2x0.6x10mm Self Tapping.
You may also be interested in the following product(s)