VEX Motor 269 Integrated Encoder Module (2-pack)

This product replaces the plastic cap on the back of a 2-Wire Motor 269 with a quadrature encoder. Install this product and connect it to a Cortex Microcontroller via I2C to receive direct feedback from the motor. This encoder provides information on how fast the motor is going, how far it has traveled, and what direction it is moving.
SKU: 276-1985

Availability: 4 In Stock

$29.99

Free Shipping on orders over $50
(USA Only)

Economy shipping for $5.99 (USA Only)
Or choose UPS or USPS Priority Mail.

International Shipping also available.

US Schools/School Districts can order by Purchase Order

Description

Details

Increased feedback from your motors allows for more control.
Communicates via I2C via included 4-wire Cable.
Compatible with the VEX Cortex Microcontroller.
Supported by Flowol 4 software.

Firmware Bug Note: We've recently discovered that some of our users are experiencing issues with their robot running after it is disabled. This error is due to a bug in the VEX Cortex Microcontroller firmware.
In very rare situations, the user processor inside the Cortex Microcontroller may encounter a partial reset (caused by a static shock, or intermittent power connection) while the master processor continues to operate normally. In this situation, the Cortex Microcontroller firmware could continue to send the last received command to the motor controllers, causing the motors to continue to run even if the robot has stopped communication with the joystick.
This error is rare, and very difficult to reproduce. We have identified that robots using the VEX Integrated Motor Encoders may be susceptible to this failure as the result of a static shock to the Cortex Microcontroller's I2C port. Users who experience such a failure should power-cycle their robots, which will reboot the Cortex processors and resume normal operation.
This bug is not something caused by user software programs. We are working to correct this issue with a firmware update in the coming months and apologize for any inconvenience this may have caused you.
Notes:
Do not over-tighten screws when installing the Integrated Motor Encoder. Over-tightening can affect encoder performance.
Up to (8) I2C devices can be chained together and connected to (1) I2C port on the Cortex Microcontroller.

Additional Info

Additional Info

Specifications

Kit Contents:
(2) Motor Encoder Caps for the 2-Wire Motor 269.
(2)Replacement Gears with White/Black Encoder Wheel.
(10) Cap Mounting Screws.
(2) 12" Long, 4-Wire Extension Cable.
Compatibility: 2-Wire Motor 269, Cortex Microcontroller, 4-Wire Extension Cables.
Function: Measures 240.448 ticks per revolution of the motor output shaft.
Outputs: 4-Wire Cable
Connect to I2C port on microcontroller or another encoder
Black:ground.
Red:+5V.
Yellow:control signal.
White:control signal.

Data Sheets
Minimum Age No
SKU 276-1985
Other SKUs No